Carpet Calculator

Carpet comes off wide rolls, so you pay for full-width pieces. This calculator finds the cheapest layout and shows the true amount to buy.

Free · No sign-up · Updated October 2026

Your measurements

Room length
ft
in
Room width
ft
in
/ sq ft
Many quotes include pad and labor

Your results

Live

Quick answer

How much carpet do I need?

Carpet comes on 12 ft or 15 ft wide rolls, so you buy full-width pieces. A 12 × 12 ft room needs about 16.7 sq yd from a 12 ft roll. Divide square feet by 9 to convert to square yards.

How to use the carpet calculator

  1. Measure the room length and width at the widest points.
  2. Choose the roll width your carpet comes in. Ask the store if you are not sure.
  3. Enter your installed price per square foot.
  4. Read the square yards to buy. Try another roll width to see if it saves carpet.

Carpet needed by room size

Includes 3 in at each end for trimming. Shows how roll width changes what you buy.

Room sizeRoom area12 ft roll15 ft roll
10 × 10 ft100 sq ft14.0 sq yd17.5 sq yd
10 × 12 ft120 sq ft14.0 sq yd17.5 sq yd
12 × 12 ft144 sq ft16.7 sq yd20.8 sq yd
12 × 14 ft168 sq ft19.3 sq yd20.8 sq yd
13 × 15 ft195 sq ft36.0 sq yd22.5 sq yd
14 × 16 ft224 sq ft38.7 sq yd27.5 sq yd
15 × 20 ft300 sq ft41.3 sq yd34.2 sq yd

Calculated with the same formulas as the calculator above. Change any number in the calculator for your exact size.

Why carpet needs more than the room size

Carpet is cut from rolls that are usually 12 ft wide. A 13 ft wide room cannot be covered by one 12 ft piece, so you need a second full-width strip and a seam. The calculator tries both directions and picks the one that wastes less.

Strips = room width ÷ roll width (rounded up) Carpet = strips × roll width × (room length + 6 in trim) Sq yd = carpet sq ft ÷ 9

Example: a 15 × 13 ft family room

The room is 195 sq ft, but with a 12 ft roll you need two strips. The best layout uses 2 × 12 × 13.5 = 324 sq ft, or 36 sq yd, with one seam.

Switch to a 15 ft roll and one piece covers it: 15 × 13.5 = 202.5 sq ft, or 22.5 sq yd. That is why checking roll width can save hundreds of dollars.

Carpet buying tips

  • Run seams away from doorways and walkways, where they wear fastest.
  • Ask whether the price includes pad, installation, removal of old carpet and moving furniture.
  • Measure stairs separately. Each step usually needs a piece about 3 ft wide and 2 ft deep.
  • Carpet pile should run the same direction in connected rooms so the color looks even.

Frequently asked questions

How do I calculate square yards of carpet?

Multiply length by width in feet to get square feet, then divide by 9. Because carpet comes in 12 ft wide rolls, the amount you buy is often more than the room area.

How much does carpet cost installed?

Installed carpet commonly costs about $2 to $8 per square foot, depending on the carpet quality and whether pad and removal are included.

How much extra carpet should I order?

It depends on the room shape and roll width rather than a fixed percentage. Rooms close to 12 ft wide waste little; rooms just over 12 ft can waste a lot.

Why does my quote show more yards than my room?

Installers order full-width pieces plus extra for trimming and matching the pile direction, so a quote in square yards is often higher than the room size.

How many square yards of carpet for a 12×12 room?

About 16.7 sq yd from a 12 ft roll, including trimming allowance. The room itself is 16 sq yd.

How many square feet in a square yard of carpet?

One square yard equals 9 square feet.

Results are estimates for planning. Material sizes, coverage and prices vary by product and location, so confirm with your supplier or contractor before you buy. See how we calculate. Last reviewed October 2026.