How We Calculate

Last updated October 2026

Every SnappyScrew calculator shows its formula on its own page. This page explains the shared rules and where our typical prices come from.

Our approach

  • Exact geometry first. Areas and volumes are calculated with standard formulas from your measurements. Feet and inches are converted exactly.
  • Round up to real products. You cannot buy 1.9 gallons or 9.9 boxes, so we round up to whole units and show the exact amount as well.
  • Waste shown, not hidden. Where a job always has offcuts, we add a stated percentage that you can change.
  • Installer methods. Wallpaper uses full-height strips per roll, carpet uses roll widths and seams, roofing uses pitch factors, and fence posts include gate posts.
  • Tested. Each formula is checked against hand-worked examples and edge cases like zero, blank and very large inputs before publishing.

Standard assumptions

ItemValue we use
Interior door / window20 sq ft / 15 sq ft
Exterior door21 sq ft
Interior paint coverage350 sq ft per gallon (editable)
Concrete bag yield80 lb = 0.60 cu ft, 60 lb = 0.45, 40 lb = 0.30
Gravel weight1.4 tons per cubic yard (editable)
Shingle bundles3 per roofing square
Drywall finishingAbout 140 lb compound, 370 ft tape and 1,000 screws per 1,000 sq ft
Grout densityAbout 100 lb per cubic foot, plus 10%

Where typical prices come from

Cost ranges are national US averages collected from published 2026 cost guides and reviewed regularly:

Default material prices in the calculators are starting points you can edit. Replace them with your local store price or contractor quote for the most accurate result.

Found a problem?

Email hello@snappyscrew.com with the calculator name and the numbers you used. We fix confirmed errors quickly.