Concrete Calculator

Get the cubic yards of concrete and the number of bags to buy for a slab or round post holes.

Free · No sign-up · Updated October 2026

Your measurements

Length
ft
in
Width
ft
in
in
4 in for patios and walks
in
Hole depth
ft
in
Number of identical slabs or holes
%
/ cu yd

Your results

Live

Quick answer

How much concrete do I need?

Multiply length × width × thickness in feet to get cubic feet, divide by 27 for cubic yards, and add 10%. A 10 × 10 ft slab 4 in thick needs 1.36 cubic yards, or 62 bags of 80 lb concrete.

How to use the concrete calculator

  1. Choose a slab or round holes.
  2. Enter the size. Slabs use length, width and thickness; holes use diameter and depth.
  3. Keep 10% extra for uneven ground and spills.
  4. Read cubic yards and bags, and compare bags with a ready-mix truck.

Concrete for common slabs

10% extra included. An 80 lb bag makes about 0.6 cu ft.

Slab sizeThicknessCubic yards80 lb bags60 lb bags
4 × 4 ft4 in0.221014
8 × 8 ft4 in0.874053
10 × 10 ft4 in1.366282
10 × 20 ft4 in2.72123163
12 × 12 ft4 in1.9688118
12 × 20 ft4 in3.26147196
20 × 20 ft4 in5.43245326
24 × 24 ft6 in11.73528704

Calculated with the same formulas as the calculator above. Change any number in the calculator for your exact size.

How the concrete calculator works

Slab = length × width × thickness ÷ 12 (cubic feet) Round = 3.1416 × (diameter ÷ 24)² × depth (cubic feet) Total = volume × quantity × (1 + extra %) Yards = cubic feet ÷ 27 Bags = cubic feet ÷ bag yield

Bag yields: an 80 lb bag makes about 0.60 cu ft, a 60 lb bag about 0.45 cu ft and a 40 lb bag about 0.30 cu ft.

Example: a 10 × 10 ft patio, 4 inches thick

10 × 10 × 4 ÷ 12 = 33.3 cu ft, plus 10% = 36.7 cu ft, or 1.36 cubic yards.

That is 62 bags of 80 lb concrete (about $434 at $7 a bag) or about $272 of ready-mix at $200 a yard, before delivery fees.

Bags or a ready-mix truck?

  • Under about 1 cubic yard, bags are practical, and you can mix by hand or with a rented mixer.
  • Over 1 cubic yard, a truck saves a lot of labor. Expect a short-load fee for small orders.
  • Typical slab thickness: 4 in for patios and walks, 5–6 in for driveways and garage floors.
  • Use rebar or wire mesh in slabs, and cut control joints every 8 to 10 ft to control cracking.

Frequently asked questions

How many bags of concrete for a 10×10 slab?

A 10 × 10 slab 4 inches thick needs about 56 bags of 80 lb concrete, or 62 bags with 10% extra.

How much concrete do I need for a fence post?

A 10 in wide hole 3 ft deep holds about 1.6 cu ft, roughly 3 bags of 80 lb concrete without the post. Our fence calculator subtracts the post for you.

How much does a yard of concrete cost?

Ready-mix concrete typically costs around $140 to $250 per cubic yard delivered, depending on your area and order size.

How thick should a concrete slab be?

4 inches is standard for patios, walks and shed floors. Driveways and slabs that carry vehicles should be 5 to 6 inches.

How many bags of concrete for a 10×20 slab?

A 10 × 20 ft slab 4 in thick needs 123 bags of 80 lb concrete, or 2.72 cubic yards, including 10% extra. A ready-mix truck is easier at this size.

How many 80 lb bags of concrete make a yard?

About 45 bags. One cubic yard is 27 cu ft and each 80 lb bag makes about 0.6 cu ft.

Results are estimates for planning. Material sizes, coverage and prices vary by product and location, so confirm with your supplier or contractor before you buy. See how we calculate. Last reviewed October 2026.