Wallpaper Calculator

Count rolls the way installers do: by how many full-height strips you can cut from each roll, including the pattern repeat.

Free · No sign-up · Updated October 2026

Your measurements

Room length
ft
in
Room width
ft
in
Wall height
ft
in
in
Printed on the label
ft
in
0 for random-match patterns

Your results

Live

Quick answer

How many rolls of wallpaper do I need?

Count full-height strips, not square feet. A standard 20.5 in × 33 ft roll gives three strips on 8 ft walls, so a 12 × 12 ft room with one door and one window needs 10 rolls.

How to use the wallpaper calculator

  1. Measure the room length, width and wall height.
  2. Count the doors and windows.
  3. Copy the roll width, roll length and pattern repeat from the wallpaper label.
  4. Read the number of rolls. Buy them all from the same batch number.

Wallpaper rolls by room size

20.5 in × 33 ft rolls, one door and one window.

Room size8 ft walls9 ft walls9 ft walls, 27 in repeat
8 × 10 ft7 rolls7 rolls11 rolls
10 × 10 ft8 rolls8 rolls12 rolls
10 × 12 ft9 rolls9 rolls13 rolls
12 × 12 ft10 rolls10 rolls14 rolls
12 × 14 ft10 rolls10 rolls15 rolls
14 × 16 ft12 rolls12 rolls18 rolls

Calculated with the same formulas as the calculator above. Change any number in the calculator for your exact size.

Why we count strips, not square feet

Wallpaper is hung in full-height strips. If a roll is 33 ft long and each strip is 8 ft 4 in, you only get three strips from it; the leftover piece is too short to use. Square-foot math ignores that waste and usually tells you to buy too little.

Strip length = wall height + 4 in trim + pattern repeat Strips per roll = roll length ÷ strip length (rounded down) Strips needed = room perimeter ÷ roll width (rounded up) Rolls = strips needed ÷ strips per roll (rounded up)

Doors and windows save a few strips, but paper still goes above and below them, so the calculator gives them half credit.

Example: a 12 × 10 ft room

The perimeter is 44 ft, or 528 in. With 20.5 in paper you need 26 strips; the door and window save one, leaving 25 strips.

Each strip is 100 in long (96 in wall plus 4 in trim), so a 33 ft roll gives 3 strips. 25 ÷ 3 = 8.3, so buy 9 rolls ($540 at $60 each).

Wallpaper tips

  • Check the batch or dye lot number on every roll. Colors can differ slightly between batches.
  • Large pattern repeats waste more paper, especially on taller walls. On 9 ft walls a 27 in repeat cuts a 33 ft roll from three strips to two.
  • Buy one extra roll for repairs later. It is hard to find the same batch again.
  • Start hanging next to a door or in a corner where a mismatch will be least visible.

Frequently asked questions

How many rolls of wallpaper for a 12×10 room?

With 8 ft walls, one door and one window, you need about 9 standard rolls (20.5 in × 33 ft) of a random-match paper. Large pattern repeats can need more, especially on walls taller than 8 ft.

What is a pattern repeat?

It is the distance before the pattern starts again down the roll. You lose up to one repeat on every strip while lining up the pattern, so a bigger repeat means more rolls.

What is a standard wallpaper roll size in the US?

Many rolls sold in the US are about 20.5 to 21 in wide and 33 ft long (around 56 sq ft). Some American rolls are 27 in wide. Always check the label.

Should I subtract windows?

Only partly. You still need paper above and below windows and over doors, which is why the calculator gives openings half credit.

How much does a roll of wallpaper cover?

A standard 20.5 in × 33 ft roll covers about 56 sq ft, but you usually get only three full strips from it on 8 ft walls, so plan by strips.

How many rolls of wallpaper for an accent wall?

A 12 ft wide accent wall 8 ft tall needs 8 strips of 20.5 in paper, which is 3 rolls of 33 ft.

Results are estimates for planning. Material sizes, coverage and prices vary by product and location, so confirm with your supplier or contractor before you buy. See how we calculate. Last reviewed October 2026.