Gravel Calculator

Enter the area and depth to get the tons and cubic yards of gravel to order.

Free · No sign-up · Updated October 2026

Your measurements

Area length
ft
in
Area width
ft
in
sq ft
Fill this in to skip length and width
in
tons / cu yd
Most gravel is 1.3–1.7
/ cu yd

Your results

Live

Quick answer

How much gravel do I need?

Find cubic yards (area × depth in inches ÷ 12 ÷ 27) and multiply by about 1.4 tons per yard. A 200 sq ft path at 4 in deep needs 2.47 cubic yards, or about 3.46 tons.

How to use the gravel calculator

  1. Measure the length and width of the area.
  2. Choose the depth. Paths need 2 to 3 inches; driveways need 4 inches or more.
  3. Keep the weight at 1.4 tons per cubic yard unless your supplier gives a different number.
  4. Read tons and cubic yards. Suppliers sell by one or the other.

Tons of gravel: quick chart

At 1.4 tons per cubic yard.

Area2 in deep3 in deep4 in deep6 in deep
100 sq ft0.86 tons1.30 tons1.73 tons2.59 tons
200 sq ft1.73 tons2.59 tons3.46 tons5.19 tons
300 sq ft2.59 tons3.89 tons5.19 tons7.78 tons
500 sq ft4.32 tons6.48 tons8.64 tons12.96 tons
1,000 sq ft8.64 tons12.96 tons17.28 tons25.93 tons

Calculated with the same formulas as the calculator above. Change any number in the calculator for your exact size.

How the gravel calculator works

Cubic feet = area × depth ÷ 12 Cubic yards = cubic feet ÷ 27 Tons = cubic yards × weight per cubic yard

Gravel weight depends on the stone and its moisture. Crushed stone and pea gravel are usually around 1.4 tons per cubic yard.

Example: a 20 × 10 ft path at 4 inches

200 sq ft × 4 in ÷ 12 = 66.7 cu ft, or 2.47 cubic yards.

At 1.4 tons per yard that is 3.46 tons, about $123 at $50 per yard before delivery.

Recommended gravel depth

ProjectDepth
Garden path or decorative bed2–3 in
Patio or shed base4 in
Driveway top layer4–6 in
New driveway (base + top)8–12 in in layers

Frequently asked questions

How many tons of gravel do I need?

Multiply length × width × depth (in feet) to get cubic feet, divide by 27 for cubic yards, then multiply by about 1.4 for tons.

How much does a ton of gravel cover?

At 2 inches deep, one ton covers roughly 110 to 120 sq ft. At 4 inches, it covers about half that.

How much does gravel cost?

Bulk gravel commonly costs about $30 to $100 per cubic yard depending on the stone, plus delivery.

Should I put fabric under gravel?

Landscape fabric under paths and beds helps stop weeds and keeps gravel from sinking into soil.

How many tons of gravel for a driveway?

A 500 sq ft driveway area at 4 in deep needs about 8.6 tons. At 6 in deep it needs about 13 tons.

How many tons are in a cubic yard of gravel?

Most gravel weighs about 1.4 tons per cubic yard, and up to 1.7 tons when wet or very dense.

Results are estimates for planning. Material sizes, coverage and prices vary by product and location, so confirm with your supplier or contractor before you buy. See how we calculate. Last reviewed October 2026.