Paver Calculator

Enter your patio size and paver size to get the pavers, gravel base and sand to order.

Free · No sign-up · Updated October 2026

Your measurements

Patio length
ft
in
Patio width
ft
in
sq ft
Fill this in to skip length and width
in
in
%
15% for herringbone
in
4 in for patios, 6–8 in for driveways
in
/ sq ft

Your results

Live

Quick answer

How many pavers do I need?

Divide the patio area by the area of one paver and add 10% for cuts. A 12 × 12 ft patio needs 713 pavers of 4 × 8 in, plus about 3 tons of base gravel and 0.44 cubic yards of sand.

How to use the paver calculator

  1. Measure the patio or walkway area.
  2. Enter the paver size from the product label.
  3. Keep 10% extra for straight patterns, or 15% for herringbone and curves.
  4. Read pavers, base gravel and sand.

Pavers, gravel and sand by patio size

4 × 8 in pavers, 10% extra, 4 in gravel base and 1 in sand.

Patio sizePaversBase gravelSandInstalled cost (typical)
10 × 10 ft4952.07 tons0.31 cu yd$800–$2,400
12 × 12 ft7132.99 tons0.44 cu yd$1,152–$3,456
12 × 16 ft9513.98 tons0.59 cu yd$1,536–$4,608
16 × 16 ft1,2685.31 tons0.79 cu yd$2,048–$6,144
16 × 20 ft1,5846.64 tons0.99 cu yd$2,560–$7,680
20 × 20 ft1,9808.30 tons1.23 cu yd$3,200–$9,600

Calculated with the same formulas as the calculator above. Change any number in the calculator for your exact size.

How the paver calculator works

Pavers = area × 144 ÷ (paver length × width) × (1 + waste %) Base gravel = area × base depth ÷ 12 ÷ 27 × 1.2 (cubic yards, +20% for compaction) Base tons = cubic yards × 1.4 Sand = area × sand depth ÷ 12 ÷ 27 (cubic yards)

Example: a 12 × 10 ft brick paver patio

120 sq ft of 4 × 8 in pavers needs 540 pavers, or 594 with 10% extra.

A 4 in base takes about 2.49 tons of gravel, and a 1 in bed takes 0.37 cubic yards of sand. Pavers cost about $660 at $5 per sq ft, and a pro typically charges $960 to $2,880 installed.

Paver patio tips

  • Dig out the depth of base + sand + paver thickness, and slope the patio about 1/4 in per foot away from the house.
  • Compact the gravel base in 2 in layers with a plate compactor. Most patio failures come from a weak base.
  • Use polymeric sand in the joints to lock pavers in place and slow weeds.
  • Install a solid edge restraint around the patio so pavers do not spread.

Frequently asked questions

How many pavers do I need for a 10×12 patio?

With 4 × 8 in pavers you need 540 pavers for 120 sq ft, or about 594 with 10% extra for cuts.

How much gravel do I need under pavers?

Use 4 inches of compacted gravel for patios and walkways and 6 to 8 inches for driveways. A 120 sq ft patio needs about 2.5 tons at 4 inches.

How much sand do I need for pavers?

About 1 inch of bedding sand, which is roughly 0.37 cubic yards for 120 sq ft, plus joint sand after laying.

How much does a paver patio cost?

Installed paver patios typically cost $8 to $24 per square foot. Doing it yourself costs mainly pavers, base and rental equipment.

How many pavers for a 10×10 patio?

495 pavers of 4 × 8 in, including 10% extra for cuts.

How many pavers per square foot?

About 4.5 pavers of 4 × 8 in per square foot, before waste.

Results are estimates for planning. Material sizes, coverage and prices vary by product and location, so confirm with your supplier or contractor before you buy. See how we calculate. Last reviewed October 2026.